Air Duct Sealing in Tulsa, OK

Quick facts	Answer
Cost range	Sealing varies by home; replacement runs $4,000-$8,000+
Time	Varies by home - confirm in your quote
Who's qualified	Ask for proof of insurance, relevant certifications, and any license your state or city requires.

What do Oklahoma code rules require for air duct sealing in Tulsa?

The Oklahoma Residential Code requires ductwork, air-handling units, return air boxes, and filter boxes to be sealed. Plenums, start collars, coil connections, Y's, and supply boot inner-liners must use liquid-applied or mastic sealants. Ducts outside conditioned space must be insulated to at least R-8 for ducts 3 inches and larger, and R-6 for smaller ducts.

How much duct leakage is allowed in Tulsa homes?

Oklahoma code requires ducts to be tested and verified at total leakage of no more than 4 cfm per 100 square feet, or 3 cfm if the air handler is not installed. State weatherization guidance also sets a target of 1 Pascal per register when measured with a pressure pan. Ask the pro for these test results.

Can I get a rebate for air duct sealing in Tulsa?

PSO rebate listings for Tulsa and eastern Oklahoma include duct sealing through the Power Forward program, listed at up to $300 on one page and up to $200 on another. OG&E advertises up to $300 for duct and/or air sealing. Some Oklahoma rebates are closed and return in 2027, so check availability each program year.

Why does attic insulation matter for ducts in Tulsa?

Oklahoma guidance requires accessible attics to be insulated to R-49 or to capacity if less. Hot attics make duct leakage and heat gain bigger problems. Supply ducts in attics must be sealed and insulated to a minimum of R-8, and uninsulated ducts outside the thermal boundary should be insulated to R-8, or R-12 if exposed to the exterior.

What to do next

Ask the pro to run a duct leakage test and show results at or under 4 cfm per 100 square feet.
Request a quote that lists sealing with mastic and insulation levels of R-8 or R-6 by duct size.
Check current PSO Power Forward and OG&E rebate amounts before booking, since some rebates return in 2027.
Ask the pro for proof of insurance and any license your state or city requires.
Call (918) 727-7715 or email [email protected] for a free quote from an independent, insured spray foam insulation contractor.

Tulsa Foam Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

How much does duct work cost in Tulsa?

One Tulsa cost guide cites whole-home duct replacement at about $4,000 to $8,000+ and major repairs at about $1,500 to $3,500. A single-room addition project runs about $800 to $1,500. Sealing is usually far cheaper than replacement.

What sealant does Oklahoma code require on ducts?

Oklahoma code requires sheet metal plenums, start collars, and connections to the coil, Y's, and supply boot inner-liners to be sealed with liquid-applied or mastic sealants that comply with 181 BM.

What insulation R-value do Tulsa ducts need?

Supply ducts in attics must be sealed and insulated to a minimum of R-8, and other ducts to R-6. The Oklahoma Residential Code requires at least R-8 for ducts 3 inches and larger outside conditioned space, and R-6 for smaller ducts.

What energy code applies in Oklahoma?

The Oklahoma Uniform Building Code Commission uses the 2021 International Energy Conservation Code with Oklahoma-specific amendments. The current statewide codes became effective November 13, 2022.