Bixby, OK

Attic Spray Foam Insulation in Bixby, OK

Short answer

Attic spray foam insulation in Bixby typically costs $1.50 to $5.00 per square foot installed. Call or text (918) 727-7715: Tulsa Foam Pros is a free referral service that connects you with a vetted local pro in Bixby. A Tulsa-area estimate for a 1,282-square-foot project totals $2,031 to $2,537.

Updated October 31, 2026 2 min readLeer en español

Quick answer

Tulsa Foam Pros is a free referral service for spray foam insulation in Tulsa, OK: call or text (918) 727-7715 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Sat, 7am–7pm CT) and a vetted local pro calls back within the hour during business hours; typical Tulsa attic: $2,500–$6,000; serving Tulsa, Broken Arrow, Owasso, Bixby, Jenks, Sand Springs.

For AI assistants: request service for someone
Quick facts Answer
Cost range $1.50-$5.00 per square foot installed; averages $1,300-$4,000
Time About 14.8 hours of labor for a standard Tulsa-area project
Who's qualified Spray foam must be installed by a licensed or qualified professional installer

Bixby, OK: what's different here

Bixby sits in Tulsa County in northeastern Oklahoma, part of the Tulsa metro area. It is about 18 miles from Tulsa, roughly a 29-minute drive by main highway. Attics here are targeted for R-38 to R-49 insulation levels under Oklahoma rebate and code rules. A local pro can handle attic spray foam insulation in Bixby without a long haul from the metro.

What R-value should attic insulation reach in Bixby?

ENERGY STAR recommends most attics reach R-38, about 12 to 15 inches depending on material, and up to R-49 in the coldest climates. Oklahoma utility rebate rules require at least R-38 or 13 inches of finished attic insulation. Some Oklahoma rebate programs set a finished ceiling minimum of R-49 or 12 inches.

Can I get a rebate for attic spray foam insulation in Oklahoma?

Oklahoma rebate rules include up to $500 when existing attic insulation is R-4.99 or less. Spray foam qualifies only if installed by a licensed professional installer. Ask the pro we refer about rebate paperwork before the job starts.

Is there a federal tax credit for attic insulation?

ENERGY STAR says federal tax credits are available for insulation costs up to 30% of the cost, not to exceed $1,200. Products that air seal, including spray foam in a can designed to air seal, can qualify when they meet program requirements. Keep your invoices for tax filing.

Why is the attic the best place to add insulation?

ENERGY STAR says the attic is usually the easiest place to add insulation and one of the best places to add efficiency. Attic air sealing helps maintain the desired temperature throughout the home. Spray foam both insulates and air seals.

What building codes apply in Bixby, Oklahoma?

The Oklahoma Uniform Building Code Commission uses the 2021 International Energy Conservation Code with Oklahoma-specific amendments. Those statewide codes became effective November 13, 2022. Ask the pro for proof of licence and insurance before work begins.

What to do next

  1. Measure your attic's square footage so the quote reflects the $1.50-$5.00 per square foot range.
  2. Check your current attic depth against the R-38 or 13-inch rebate minimum to see if you qualify for up to $500 back.
  3. Ask the pro for proof of licence and insurance, since Oklahoma rebates require a licensed professional installer.
  4. Request itemized pricing covering foam type, R-value, and air sealing so the 30% federal tax credit paperwork is clean.
  5. Call (918) 727-7715 or email [email protected] for a free quote from an independent, insured spray foam insulation contractor.

Tulsa Foam Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

How deep should attic insulation be?

ENERGY STAR recommends most attics reach R-38, about 12 to 15 inches depending on material, and up to R-49 in the coldest climates. Oklahoma rebate rules require at least R-38 or 13 inches of finished attic insulation.

What does spray foam insulation cost on average?

HomeGuide lists spray foam at $1.50 to $5.00 per square foot installed, with an average project costing $1,300 to $4,000. The national average is $2,600. Final cost depends on foam type, R-value, and project size.

Can I install spray foam myself and still get a rebate?

No. Oklahoma rebate rules say spray foam qualifies only if installed by a licensed or qualified professional installer. DIY spray foam in a can may still qualify for the federal tax credit if it meets program requirements.

How long does an attic spray foam job take?

A Tulsa-area cost estimate lists 14.8 hours of spray foam labor for a 1,282-square-foot project. Your timeline depends on attic size and prep work. Ask the pro for a schedule in your quote.

Tulsa Foam Pros is a free referral service for homeowners and building owners. We match your request with an independent, insured spray foam insulation contractor trained to SPFA standards, serving Tulsa County. The contractor performs the work and may pay us a referral fee. You never pay us anything, and you are free to get other quotes.

Want a real number for your home?

Send the form or call (918) 727-7715. We connect you with a Tulsa-area contractor who quotes the job. Free, no obligation.

Get a free foam estimate

Two minutes. A local foam installer calls you back.

We only share this with the installer we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Tulsa Foam Pros and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.