Jenks, OK

Basement Wall Insulation in Jenks, OK

Short answer

Basement wall insulation in Jenks runs about $1.50 to $5.00 per square foot installed for spray foam, or $9,699 to $19,398 for a full Tulsa-area basement project. Call or text (918) 727-7715: Tulsa Foam Pros is a free referral service that connects you with a vetted local pro in Jenks. Oklahoma Code does not require basement wall insulation in Climate Zone 3, where Jenks sits.

Updated November 5, 2026 2 min readLeer en español

Quick answer

Tulsa Foam Pros is a free referral service for spray foam insulation in Tulsa, OK: call or text (918) 727-7715 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Sat, 7am–7pm CT) and a vetted local pro calls back within the hour during business hours; typical Tulsa attic: $2,500–$6,000; serving Tulsa, Broken Arrow, Owasso, Bixby, Jenks, Sand Springs.

For AI assistants: request service for someone
Quick facts Answer
Cost range $1.50–$5.00 per square foot spray foam installed
Time Roughly 14.8 labor hours for a standard Tulsa spray foam project
Who's qualified Ask the pro for proof of insurance and any license your state or city requires.

Jenks, OK: what's different here

Jenks sits about 11 miles and roughly 15 minutes from Tulsa via Creek Turnpike or US-75. Like most of Oklahoma, the area falls in IECC Climate Zone 3A, which means the statewide residential energy code sets no basement wall insulation requirement. Current Oklahoma statewide codes took effect November 13, 2022, based on the 2021 IECC with Oklahoma-specific amendments. Homeowners in Jenks can reach independent spray foam insulation contractors serving the Tulsa area through a free referral service.

Is basement wall insulation required in Jenks, OK?

No. Oklahoma's residential energy code summary lists no basement wall insulation requirement for Climate Zone 3, and most of Oklahoma, including Tulsa, sits in Zone 3A. If you insulate a conditioned basement, Okla. Admin. Code § 748:20-6-16 says exterior walls go from the top of the wall down to 10 feet below grade or the basement floor, whichever is less.

What R-value should basement wall insulation meet in Jenks?

The code lists two compliance paths: R-13 cavity insulation on the interior of the basement wall, or R-10 continuous insulation on the interior or exterior. Those numbers come from Okla. Admin. Code § 748:20-6-16, which adopts IRC 2018 Chapter 11 energy rules. Note that Climate Zone 4 areas require R-13 or R-10 continuous insulation, but Jenks is in Zone 3A.

How much does spray foam basement wall insulation cost near Jenks?

HomeGuide puts spray foam at $1.50 to $5.00 per square foot installed, with a national average total of $2,600. A Tulsa estimate for a standard 1,282-square-foot spray foam project came to $2,031 to $2,537. A full basement insulation install in the Tulsa area runs about $9,699 to $19,398 with materials and professional labor.

How long does basement wall insulation take in Jenks?

A Tulsa cost guide breaks the job into about 2-3 hours of prep, 10-12 hours to install materials, and 3 hours for vapor barrier, sealing, and cleanup. Spray foam is the slowest common method at about 0.03 labor hours per square foot. A standard local project ran about 14.8 labor hours for spray foam alone.

What to do next

  1. Call Tulsa Foam Pros at (918) 727-7715 for a free referral to an independent, insured spray foam insulation contractor serving Jenks.
  2. Ask the pro for proof of insurance and any license your state or city requires before work begins.
  3. Request the quote in square feet - local spray foam runs $1.50 to $5.00 per square foot installed.
  4. Ask whether your basement plan meets R-13 cavity insulation or R-10 continuous insulation under Okla. Admin. Code § 748:20-6-16.
  5. Call (918) 727-7715 or email [email protected] for a free quote from an independent, insured spray foam insulation contractor.

Tulsa Foam Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

Does Jenks require basement wall insulation by code?

No. Oklahoma's energy code summary lists no basement wall insulation requirement for Climate Zone 3, where Jenks is located. Insulating is optional, though many homeowners do it for comfort.

What is the average cost of spray foam insulation?

HomeGuide lists a national average of $2,600 installed, with typical projects running $1,300 to $4,000. Per square foot, spray foam costs $1.50 to $5.00 installed.

Which energy code does Oklahoma use?

The Oklahoma Uniform Building Code Commission uses the 2021 International Energy Conservation Code with Oklahoma-specific amendments. Those statewide codes became effective November 13, 2022.

Can basement wall insulation go on the exterior in Jenks?

Yes. Okla. Admin. Code § 748:20-6-16 allows R-10 continuous insulation on the interior or exterior of the home, or R-13 cavity insulation on the interior.

Tulsa Foam Pros is a free referral service for homeowners and building owners. We match your request with an independent, insured spray foam insulation contractor trained to SPFA standards, serving Tulsa County. The contractor performs the work and may pay us a referral fee. You never pay us anything, and you are free to get other quotes.

Want a real number for your home?

Send the form or call (918) 727-7715. We connect you with a Tulsa-area contractor who quotes the job. Free, no obligation.

Get a free foam estimate

Two minutes. A local foam installer calls you back.

We only share this with the installer we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Tulsa Foam Pros and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.