| Quick facts | Answer |
|---|---|
| Cost range | About $1.00–$2.12 per board foot; many jobs near $3,900 |
| Time | Varies by home - confirm in your quote |
| Who's qualified | Ask for proof of insurance and any license your state or city requires. |
Bixby, OK: what's different here
Bixby sits in Tulsa County about 18 miles and roughly 29 minutes by car from Tulsa via main highway. The city spans Tulsa and Wagoner counties, and residential permits and code compliance may apply to insulation work there. Because the Arkansas River runs through the area, moisture control in crawl spaces and rim joists is worth considering when choosing closed cell foam.
How much does closed cell foam insulation cost per square foot in Bixby?
At typical 2-inch thickness, closed cell foam works out to roughly $2.00–$4.24 per square foot. Broader spray foam pricing in Bixby runs $1.50–$5.00 per square foot installed depending on foam type, R-value and project size. Energy.gov lists closed-cell SPF at about $1.10–$1.25 per board foot installed.
Where is closed cell foam insulation used in Bixby homes?
Closed cell foam delivers about R-5.0 to R-7.0 per inch and adds a vapor retarder effect, so it fits rim joists, crawl spaces, basements and metal buildings. It is also used on attic roof decks where limited thickness must meet code targets.
Does closed cell foam help with moisture in Bixby crawl spaces?
The Arkansas River runs through the Bixby area, so moisture control matters in flood-prone low areas. Closed cell foam's higher R-value and vapor retarder effect make it a common choice for crawl spaces and rim joists in those spots.
What R-value does closed cell foam insulation need to meet in Bixby?
Oklahoma's residential energy code calls for R-38 ceiling insulation in Climate Zone 3 and R-49 in Climate Zone 4. Crawl-space walls require R-13 or R-5ci in Zone 3 and R-13 or R-10ci in Zone 4. The state uses the 2021 International Energy Conservation Code with Oklahoma amendments, effective November 13, 2022.
What to do next
- Measure the square footage and desired thickness of the area you want insulated so your quote can be priced per board foot.
- Ask each contractor for the R-value target per inch and confirm it meets the R-38 or R-49 ceiling requirement for your climate zone.
- Request an itemized quote showing board-foot price, total board feet, thickness and any permit or code compliance costs for Bixby.
- Verify the contractor's proof of insurance and any license before work begins, and check whether the city requires a permit for the job.
- Call (918) 727-7715 or email [email protected] for a free quote from an independent, insured spray foam insulation contractor.
Tulsa Foam Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.
