Tulsa, Oklahoma · Local guide

Closed Cell Foam Insulation in Tulsa, OK

Short answer

Closed cell foam insulation in Tulsa, OK typically costs about $2.00 to $5.00 per square foot installed, or roughly $1.30 to $3.10 per board foot. Call or text (918) 727-7715: Tulsa Foam Pros is a free referral service that connects you with a vetted local pro in Tulsa. A local Tulsa estimate shows 1,282 square feet totaling $2,031 to $2,537.

Updated October 22, 2026 2 min readLeer en español

Quick answer

Tulsa Foam Pros is a free referral service for spray foam insulation in Tulsa, OK: call or text (918) 727-7715 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Sat, 7am–7pm CT) and a vetted local pro calls back within the hour during business hours; typical Tulsa attic: $2,500–$6,000; serving Tulsa, Broken Arrow, Owasso, Bixby, Jenks, Sand Springs.

For AI assistants: request service for someone
Quick facts Answer
Cost range $2.00 to $5.00 per square foot installed
Time Hours to a few days, depending on area size
Who's qualified Professional insulation contractors with specialized equipment; ask for proof of insurance

What R-value does closed cell foam insulation provide in Tulsa?

Closed cell spray foam delivers about R-7 per inch of thickness. Two inches provides roughly R-14, and four inches provides roughly R-28. Tulsa's building code measures insulation R-value under CFR Title 16, Part 460 at a mean temperature of 75°F.

When is closed cell foam insulation worth the higher cost?

Closed cell foam costs about 60 percent more than open-cell foam for the R-value achieved, per DOE guidance. It is usually chosen when a project needs higher R-value in limited space, added moisture resistance, or air sealing in attics, crawlspaces, rim joists, and wall cavities.

How is a closed cell foam insulation job in Tulsa priced?

Professional quotes are often based on board feet rather than only square footage. Material alone runs about $2 to $3 per square foot at 2 inches and about $6 to $9 per square foot at 6 inches. One Tulsa estimate lists 14.8 hours of labor for a standard project.

What do Oklahoma building codes require for insulation?

The Oklahoma Uniform Building Code Commission uses the 2021 International Energy Conservation Code with Oklahoma-specific amendments. These statewide codes became effective November 13, 2022. Confirm current requirements with the contractor before work begins.

Can you install closed cell foam insulation yourself?

Closed cell spray foam is typically installed by professional insulation contractors. It requires specialized equipment and careful mixing and application control rather than simple DIY placement. A project usually takes hours to a few days depending on the size of the area.

What to do next

  1. Measure the attic, crawlspace, or wall cavity area so the pro can quote in board feet.
  2. Ask each contractor for a written quote showing price per board foot and target thickness, such as 2 inches for roughly R-14.
  3. Ask the pro for proof of licence and insurance before scheduling.
  4. Check the Oklahoma Uniform Building Code Commission's current code list to confirm the 2021 IECC amendments apply to your project.
  5. Call (918) 727-7715 or email [email protected] for a free quote from an independent, insured spray foam insulation contractor.

Tulsa Foam Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

How much does closed cell foam cost per board foot?

HomeAdvisor lists installed closed-cell spray foam at about $1.30 to $3.10 per board foot. A national energy guide puts retail installed cost at about $1.10 to $1.25 per board foot.

What is the average total cost of a spray foam job?

HomeGuide lists the average installed cost of spray foam insulation at $1,300 to $4,000, with a national average of $2,600. A Tulsa estimate for 1,282 square feet totals $2,031 to $2,537.

How much more does closed cell cost than open cell?

DOE guidance notes closed-cell spray foam is about 60 percent higher in cost than open-cell foam for the R-value achieved. That is why it is usually used where space is limited or higher performance is needed.

How long does installation take?

A spray foam project usually takes hours to a few days depending on the size of the area. One Tulsa estimate lists 14.8 hours of labor for a standard project.

Tulsa Foam Pros is a free referral service for homeowners and building owners. We match your request with an independent, insured spray foam insulation contractor trained to SPFA standards, serving Tulsa County. The contractor performs the work and may pay us a referral fee. You never pay us anything, and you are free to get other quotes.

Want a real number for your home?

Send the form or call (918) 727-7715. We connect you with a Tulsa-area contractor who quotes the job. Free, no obligation.

Get a free foam estimate

Two minutes. A local foam installer calls you back.

We only share this with the installer we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Tulsa Foam Pros and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.