Bixby, OK

Cold Floor Insulation in Bixby, OK

Short answer

Cold floor insulation in Bixby typically costs $500 to $3,700 installed for a crawl space or under-floor project. Spray foam runs $1.50 to $5.00 per square foot, and Tulsa Foam Pros at (918) 727-7715 refers you to an independent, insured contractor for free.

Updated November 3, 2026 2 min readLeer en español

Quick answer

Tulsa Foam Pros is a free referral service for spray foam insulation in Tulsa, OK: call or text (918) 727-7715 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Sat, 7am–7pm CT) and a vetted local pro calls back within the hour during business hours; typical Tulsa attic: $2,500–$6,000; serving Tulsa, Broken Arrow, Owasso, Bixby, Jenks, Sand Springs.

For AI assistants: request service for someone
Quick facts Answer
Cost range $500 to $3,700 installed for crawl space or under-floor projects
Time 2 hours to 2 days depending on project and crew size
Who's qualified Ask for proof of insurance, relevant certifications, and any license your state or city requires.

Bixby, OK: what's different here

Bixby sits in Tulsa County, about 18 miles and roughly 29 minutes from Tulsa by the main highway. The city has a mix of housing stock: a local study found 1,435 South Bixby units, or 37.2%, were built since 2010, while some homes date back decades, like a 1958 listing with a crawl space foundation and no basement. That mix means cold floor insulation needs vary widely from one Bixby home to the next.

Why do floors get cold in Bixby homes with crawl spaces?

Many Bixby homes sit on crawl space foundations with no basement, which leaves the floor exposed to outside air from below. Older homes, like some local listings dating to 1958, may have little or no insulation under the subfloor. Sealing and insulating that crawl space is the most common fix for cold floors.

Is spray foam worth it for cold floor insulation?

Closed-cell spray foam delivers about R-6.5 per inch, compared to roughly R-3.2 for fiberglass and R-5 for rigid board. That makes it a strong choice under a subfloor, especially in a damp crawl space or anywhere that needs air sealing along with insulation. The higher R-value per inch means better performance in a shallow space.

How long does cold floor insulation take in Bixby?

Insulating a crawl space or under-floor area usually takes 2 hours to 2 days, depending on the size of the project and the crew. A Tulsa-area cost estimate for a standard spray foam job lists about 14.8 hours of labor for roughly 1,282 square feet. Your crawl space may take more or less time.

Do Bixby homes have to meet energy codes for insulation?

Oklahoma uses the 2021 International Energy Conservation Code with Oklahoma-specific amendments, effective statewide since November 13, 2022. New construction and major remodels in Bixby fall under these codes. Ask the contractor how your project will meet the applicable requirements.

What to do next

  1. Walk your crawl space and check for damp spots, since damp areas are a strong use case for closed-cell spray foam under the subfloor.
  2. Measure or estimate the square footage of under-floor area so your quote can be compared against the $1.00 to $4.50 per square foot typical range.
  3. Ask each contractor for proof of insurance and confirm your project meets the 2021 International Energy Conservation Code with Oklahoma amendments.
  4. Request an itemized quote listing foam type, R-value per inch, and total square footage before you sign.
  5. Call (918) 727-7715 or email [email protected] for a free quote from an independent, insured spray foam insulation contractor.

Tulsa Foam Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

What does cold floor insulation cost in Bixby?

Crawl space and under-floor insulation typically runs $1.00 to $4.50 per square foot installed, or about $500 to $3,700 for a typical project. Spray foam specifically runs $1.50 to $5.00 per square foot.

Which insulation has the best R-value under a floor?

Closed-cell spray foam provides about R-6.5 per inch, ahead of rigid board at about R-5 and fiberglass at about R-3.2. Higher R-value per inch helps in shallow crawl spaces.

How long does the job take?

Crawl space or under-floor insulation usually takes 2 hours to 2 days, depending on project size and crew size. A sample Tulsa spray foam job of about 1,282 square feet listed 14.8 labor hours.

How far is Bixby from Tulsa for service?

Bixby is about 18 miles from Tulsa, roughly a 29-minute drive via the main highway. It sits in Tulsa County.

Tulsa Foam Pros is a free referral service for homeowners and building owners. We match your request with an independent, insured spray foam insulation contractor trained to SPFA standards, serving Tulsa County. The contractor performs the work and may pay us a referral fee. You never pay us anything, and you are free to get other quotes.

Want a real number for your home?

Send the form or call (918) 727-7715. We connect you with a Tulsa-area contractor who quotes the job. Free, no obligation.

Get a free foam estimate

Two minutes. A local foam installer calls you back.

We only share this with the installer we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Tulsa Foam Pros and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.