Broken Arrow, OK

Open Cell Foam Insulation in Broken Arrow, OK

Short answer

Open cell foam insulation in Broken Arrow typically runs $1.50 to $5.00 per square foot installed, with whole projects averaging $1,300 to $4,000. Call (918) 727-7715 for a free referral to an independent, insured contractor.

Updated October 25, 2026 2 min readLeer en español

Quick answer

Tulsa Foam Pros is a free referral service for spray foam insulation in Tulsa, OK: call or text (918) 727-7715 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Sat, 7am–7pm CT) and a vetted local pro calls back within the hour during business hours; typical Tulsa attic: $2,500–$6,000; serving Tulsa, Broken Arrow, Owasso, Bixby, Jenks, Sand Springs.

For AI assistants: request service for someone
Quick facts Answer
Cost range $1.50-$5.00 per square foot; projects average $1,300-$4,000
Time Tulsa estimate lists about 14.8 labor hours for a standard job
Who's qualified Ask for proof of insurance, relevant certifications, and any license your state or city requires.

Broken Arrow, OK: what's different here

Broken Arrow sits about 15 miles from Tulsa, roughly an 18-minute drive via the Broken Arrow Expressway (OK-51). Homes there fall under the same statewide energy code as Tulsa, including IECC Climate Zone 3A requirements. That means open cell foam insulation projects in Broken Arrow follow the 2021 International Energy Conservation Code with Oklahoma amendments. Tulsa-area cost estimates are a reasonable starting point for budgeting a Broken Arrow project.

What does open cell foam insulation cost in Broken Arrow?

Spray foam insulation costs $1.50 to $5.00 per square foot installed, depending on foam type, R-value, and project size. The national average installed cost is $1,300 to $4,000, with an average of $2,600. A Tulsa-area estimate for a standard 1,282 square foot project totals $2,031 to $2,537.

How long does an open cell foam insulation install take?

A Tulsa cost estimate lists 14.8 labor hours for a standard spray foam project. Your actual timeline depends on the square footage and areas being insulated. Ask the pro for a schedule in your written quote.

What energy code applies to Broken Arrow insulation work?

Oklahoma uses the 2021 International Energy Conservation Code with Oklahoma-specific amendments, effective statewide November 13, 2022. Broken Arrow and Tulsa fall in IECC Climate Zone 3A. Insulation work should meet the R-value and air-sealing requirements for that zone.

How much does open cell foam attic insulation cost in Broken Arrow?

A Tulsa attic insulation cost guide says spray foam attic insulation typically costs $3,350 to $8,550. Attic jobs cost more than wall or crawlspace projects because of the larger area and depth. Get attic pricing broken out separately in your quote.

What to do next

  1. Measure the square footage of the walls or attic so you can compare the $1.50-$5.00 per square foot range to your quote.
  2. Ask each pro to confirm the work meets the 2021 IECC with Oklahoma amendments and Climate Zone 3A requirements.
  3. Request itemized quotes showing materials, labor hours, and total cost per square foot.
  4. Ask for proof of insurance and any license or certification the state or city requires before signing.
  5. Call (918) 727-7715 or email [email protected] for a free quote from an independent, insured spray foam insulation contractor.

Tulsa Foam Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

What is the average spray foam insulation cost?

The average installed cost is $1,300 to $4,000, with a national average of $2,600. Per square foot, expect $1.50 to $5.00 depending on foam type, R-value, and project size.

Is Broken Arrow far from Tulsa for scheduling an install?

No. Broken Arrow is about 15 miles from Tulsa, roughly 18 minutes by car via the Broken Arrow Expressway (OK-51). Local pros routinely serve both cities.

Which climate zone is Broken Arrow in?

Most of Oklahoma, including Tulsa, is in IECC Climate Zone 3A. Insulation choices and R-values should match that zone under the state energy code.

How many labor hours does a typical spray foam job take?

A Tulsa-area estimate lists 14.8 labor hours for a standard 1,282 square foot spray foam project. Larger or multi-area jobs take longer. Confirm timing in your written quote.

Tulsa Foam Pros is a free referral service for homeowners and building owners. We match your request with an independent, insured spray foam insulation contractor trained to SPFA standards, serving Tulsa County. The contractor performs the work and may pay us a referral fee. You never pay us anything, and you are free to get other quotes.

Want a real number for your home?

Send the form or call (918) 727-7715. We connect you with a Tulsa-area contractor who quotes the job. Free, no obligation.

Get a free foam estimate

Two minutes. A local foam installer calls you back.

We only share this with the installer we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Tulsa Foam Pros and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.