Sand Springs, OK

Rim Joist Insulation in Sand Springs, OK

Short answer

Rim joist insulation in Sand Springs typically runs about $500 to $2,500, with many professional projects cited at $2,000 to $2,500. Call or text (918) 727-7715: Tulsa Foam Pros is a free referral service that connects you with a vetted local pro in Sand Springs. A standard job takes about 2 to 4 hours.

Updated November 10, 2026 2 min readLeer en español

Quick answer

Tulsa Foam Pros is a free referral service for spray foam insulation in Tulsa, OK: call or text (918) 727-7715 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Sat, 7am–7pm CT) and a vetted local pro calls back within the hour during business hours; typical Tulsa attic: $2,500–$6,000; serving Tulsa, Broken Arrow, Owasso, Bixby, Jenks, Sand Springs.

For AI assistants: request service for someone
Quick facts Answer
Cost range $500-$2,500 depending on home size and access
Time About 2 to 4 hours for a standard house
Who's qualified Ask for proof of insurance and any license your state or city requires.

Sand Springs, OK: what's different here

Sand Springs is in Tulsa County, about 7 miles and roughly 10 minutes from Tulsa by main highway. Like most of Oklahoma, it falls in IECC climate zone 3A under the state energy code. Homes here, especially older ones with basements or crawl spaces, often benefit from sealing the rim joist where the floor framing meets the foundation.

Why does rim joist insulation matter in Sand Springs?

The rim joist is where the floor framing meets the foundation, a common spot for air leaks in crawl spaces and basements. The Department of Energy notes air infiltration can account for 25% to 40% of heating and cooling costs in homes built before 1980. Sealing this area cuts drafts and heat loss.

Is spray foam a good choice for rim joists?

Closed-cell spray foam is specifically identified as a good fit for rim joists, crawl spaces, and basements because it air seals and insulates in one pass. Professional installation is often billed at roughly $1.00 to $2.12 per board foot for closed-cell foam. Ask the pro for a per-board-foot price in your quote.

What does Oklahoma code require for rim joist insulation?

Oklahoma residential energy-code guidance says rim joists must be insulated and include an air barrier. Sand Springs sits in climate zone 3A, where crawl space walls are listed at a minimum of R-5 continuous insulation or R-13. Attic targets like R-38 or R-49 are substantially higher.

How does the referral work for Sand Springs homeowners?

Tulsa Foam Pros is a free referral service, not a contractor. We connect you with an independent, insured spray foam insulation contractor serving Sand Springs. Ask the pro for proof of licence and insurance before work begins.

What to do next

  1. Walk the basement or crawl space and check whether the rim joist along the foundation has any insulation at all.
  2. Get a written quote that states the closed-cell foam price per board foot and total coverage area.
  3. Ask the contractor for proof of licence and insurance before scheduling the job.
  4. Confirm the plan includes an air barrier, since Oklahoma energy-code guidance requires both insulation and air sealing at the rim joist.
  5. Call (918) 727-7715 or email [email protected] for a free quote from an independent, insured spray foam insulation contractor.

Tulsa Foam Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

How long does a rim joist spray foam job take?

A typical rim joist spray-foam job takes about 2 to 4 hours for a standard house. Timing depends on home size and how easy the rim joist is to reach.

What R-value applies to crawl space walls in Sand Springs?

Sand Springs is in climate zone 3A, where the Oklahoma compliance guide lists crawl space walls at a minimum of R-5 continuous insulation or R-13. Confirm current requirements with your contractor.

Which building code applies in Oklahoma?

The Oklahoma Uniform Building Code Commission uses the 2021 International Energy Conservation Code with Oklahoma-specific amendments. Those statewide codes took effect November 13, 2022.

Does spray foam cost vary by foam type?

Yes. HomeGuide lists spray foam insulation at $1.50 to $5.00 per square foot installed, depending on foam type, R-value, and project size. Closed-cell foam for rim joists is often billed per board foot.

Tulsa Foam Pros is a free referral service for homeowners and building owners. We match your request with an independent, insured spray foam insulation contractor trained to SPFA standards, serving Tulsa County. The contractor performs the work and may pay us a referral fee. You never pay us anything, and you are free to get other quotes.

Want a real number for your home?

Send the form or call (918) 727-7715. We connect you with a Tulsa-area contractor who quotes the job. Free, no obligation.

Get a free foam estimate

Two minutes. A local foam installer calls you back.

We only share this with the installer we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Tulsa Foam Pros and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.