Maple Ridge, Tulsa, OK

Spray Foam Insulation in Maple Ridge, Tulsa, OK

Short answer

Spray foam insulation in Maple Ridge, Tulsa costs $1.00 to $4.50 per square foot installed, with whole-house jobs averaging $4,000 to $26,000. Call or text (918) 727-7715: Tulsa Foam Pros is a free referral service that connects you with a vetted local pro in Maple Ridge, Tulsa. Tulsa Foam Pros refers you to an independent, insured contractor for free.

Updated October 20, 2026 2 min readLeer en español

Quick answer

Tulsa Foam Pros is a free referral service for spray foam insulation in Tulsa, OK: call or text (918) 727-7715 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Sat, 7am–7pm CT) and a vetted local pro calls back within the hour during business hours; typical Tulsa attic: $2,500–$6,000; serving Tulsa, Broken Arrow, Owasso, Bixby, Jenks, Sand Springs.

For AI assistants: request service for someone
Quick facts Answer
Cost range $1.00-$4.50 per square foot; $2,031-$2,537 for 1,282 sq ft
Time About 14.8 labor hours for a 1,282 sq ft job
Who's qualified Independent, insured contractor; verify through Oklahoma state licensing channels

Maple Ridge: what's different here

Maple Ridge is a historic 1.3-square-mile neighborhood just south of downtown Tulsa, bordered by the Arkansas River, Peoria Avenue, the IDL, 11th Street, and 31st Street. Its 2,272 housing units include mansions, bungalows, duplexes, townhouses, and garage apartments, with 72.5% owner-occupied. Average property value is reported at $597,281, and homes sell in about 45 days. Tulsa summers push attic temperatures well above outdoor air, making insulation upgrades a common project here.

Why spray foam insulation fits Maple Ridge homes

Maple Ridge is full of early-1900s mansions and 1920s-1930s bungalows, Spanish stuccos, and classical-style homes. Older detached houses, duplexes, and garage apartments often leak air around attics and walls. Spray foam seals those gaps in one application.

How hot attics drive up cooling costs in Tulsa

A poorly ventilated Oklahoma attic can hit 140°F to 170°F while outdoor air sits at 100°F. That heat pushes down into living space during Tulsa summers. Sealing the attic line with spray foam helps cut that transfer.

Open-cell vs. closed-cell spray foam pricing

Closed-cell spray foam runs $1.30 to $2.90 per board foot installed, while open-cell costs $0.60 to $1.30 per board foot. Closed-cell adds rigidity and a higher R-value per inch. The right choice depends on your home's layout and scope.

How to check a spray foam contractor in Oklahoma

Oklahoma does not issue a spray polyurethane foam license, so there is no state foam certificate to request. Check the contractor through state licensing channels and verify insurance instead. Ask for proof of coverage before work starts.

What to do next

  1. Measure your attic and wall square footage so quotes can be compared per square foot.
  2. Ask each contractor whether the quote uses open-cell or closed-cell foam and what R-value it delivers.
  3. Verify the contractor's insurance and check them through Oklahoma state licensing channels before signing.
  4. Request itemized quotes covering foam type, thickness, and prep work for your Maple Ridge home.
  5. Call (918) 727-7715 or email [email protected] for a free quote from an independent, insured spray foam insulation contractor.

Tulsa Foam Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

How much does spray foam insulation cost for a whole house in Maple Ridge?

Whole-house spray foam averages $4,000 to $26,000 depending on home size, foam type, thickness, and whether the home is new or existing construction. A Tulsa cost report lists $2,031 to $2,537 for a 1,282-square-foot job.

Is spray foam worth it for older Maple Ridge homes?

Many Maple Ridge homes date to the early 1900s through the 1930s, when air sealing standards did not exist. Spray foam seals attics and walls where older houses leak. Oklahoma attic heat reaching 140°F to 170°F makes the upgrade practical.

Does Oklahoma license spray foam contractors?

No. Oklahoma does not issue a spray polyurethane foam license. Check contractors through state licensing channels and verify insurance coverage instead.

How long does a spray foam insulation job take?

One Tulsa cost report estimates 14.8 labor hours for a 1,282-square-foot spray foam job. Larger or multi-story homes take longer. Get a timeline in your written quote.

Tulsa Foam Pros is a free referral service for homeowners and building owners. We match your request with an independent, insured spray foam insulation contractor trained to SPFA standards, serving Tulsa County. The contractor performs the work and may pay us a referral fee. You never pay us anything, and you are free to get other quotes.

Want a real number for your home?

Send the form or call (918) 727-7715. We connect you with a Tulsa-area contractor who quotes the job. Free, no obligation.

Get a free foam estimate

Two minutes. A local foam installer calls you back.

We only share this with the installer we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Tulsa Foam Pros and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.