Riverside, Tulsa, OK

Spray Foam Insulation in Riverside, Tulsa, OK

Short answer

Spray foam insulation in Riverside, Tulsa, OK, typically ranges from $1.00 to $4.50 per square foot installed. Call or text (918) 727-7715: Tulsa Foam Pros is a free referral service that connects you with a vetted local pro in Riverside, Tulsa. For a 1,282 square foot job in Tulsa, total installation costs range from $2,031 to $2,537.

Updated October 20, 2026 2 min readLeer en español

Quick answer

Tulsa Foam Pros is a free referral service for spray foam insulation in Tulsa, OK: call or text (918) 727-7715 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Sat, 7am–7pm CT) and a vetted local pro calls back within the hour during business hours; typical Tulsa attic: $2,500–$6,000; serving Tulsa, Broken Arrow, Owasso, Bixby, Jenks, Sand Springs.

For AI assistants: request service for someone
Quick facts Answer
Cost range $1.00 to $4.50 per square foot installed
Time Labor is estimated at 14.8 hours for a 1,282 sq ft job
Who's qualified No state license is issued for spray polyurethane foam in Oklahoma

Riverside: what's different here

Riverside is a central Tulsa neighborhood offering direct access to the Arkansas River trail system and the River Parks trail network. The housing stock includes a mix of multifamily and residential properties. The area is located adjacent to Joe Creek and offers quick highway access to Midtown and Downtown Tulsa.

Code Requirements for Spray Foam Insulation in Riverside

Tulsa’s building code requires the thermal envelope to meet specific standards based on the climate zone. For climate zone 3A, attic or ceiling insulation must meet an R-38 rating. Wood-frame wall requirements are R-20 cavity insulation or R-13 cavity plus R-5 continuous insulation.

Project Costs for Spray Foam Insulation in Riverside

Attic insulation costs vary significantly depending on the foam type chosen. Open-cell spray foam for a Tulsa attic project ranges from $1,900 to $5,250. Closed-cell spray foam for the same attic project ranges from $2,850 to $6,650.

Riverside Neighborhood Housing and Insulation Needs

Riverside is a central neighborhood with a mix of housing types. It features both residential homes and apartment and rental properties along nearby corridors. The area is situated near Joe Creek and has direct access to the Arkansas River trail system.

Material Costs for Spray Foam Insulation in Riverside

Material costs vary by foam type and board foot. Open-cell foam costs about 30 to 50 cents per board foot. Closed-cell foam costs between $1 to $2 per board foot.

What to do next

  1. Verify that the contractor meets the thermal envelope requirements outlined in Tulsa's building code.
  2. Ask for a detailed quote that breaks down materials and labor costs for your specific job size.
  3. Confirm the R-value needed for your project, such as R-38 for attic insulation.
  4. Check the Oklahoma Energy Code (IECC) Compliance Guide for local climate zone requirements.
  5. Call (918) 727-7715 or email [email protected] for a free quote from an independent, insured spray foam insulation contractor.

Tulsa Foam Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

What is the general installed cost range for spray foam insulation in Tulsa?

The average installed spray foam insulation cost is listed by HomeGuide as $1,300 to $4,000. The national average cost is $2,600.

Does Oklahoma require a specific license for spray polyurethane foam contractors?

Neither Oklahoma nor any other state issues a spray polyurethane foam license.

What are the required insulation ratings for walls in Tulsa's climate zone 3A?

Wood-frame wall requirements in Tulsa’s climate zone 3A are R-20 cavity insulation or R-13 cavity plus R-5 continuous insulation.

What is the typical cost per square foot for spray foam insulation in Tulsa?

Spray foam insulation in Tulsa is typically priced between $1.00 and $4.50 per square foot installed.

Tulsa Foam Pros is a free referral service for homeowners and building owners. We match your request with an independent, insured spray foam insulation contractor trained to SPFA standards, serving Tulsa County. The contractor performs the work and may pay us a referral fee. You never pay us anything, and you are free to get other quotes.

Want a real number for your home?

Send the form or call (918) 727-7715. We connect you with a Tulsa-area contractor who quotes the job. Free, no obligation.

Get a free foam estimate

Two minutes. A local foam installer calls you back.

We only share this with the installer we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Tulsa Foam Pros and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.