Tulsa, Oklahoma · Local guide

Trusted spray foam installers for Jenks attic heat?

Short answer

Tulsa Foam Pros at (918) 727-7715 is a free way to reach independent, insured spray foam contractors for Jenks attics; typical Tulsa attic spray foam runs $2,500 to $6,000. We serve Tulsa, Broken Arrow, Owasso and Bixby, and a local pro calls back within the hour Mon–Sat, 7am–7pm CT.

Updated October 22, 2026 2 min read

Quick answer

Tulsa Foam Pros is a free referral service for spray foam insulation in Tulsa, OK: call or text (918) 727-7715 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Sat, 7am–7pm CT) and a vetted local pro calls back within the hour during business hours; typical Tulsa attic: $2,500–$6,000; serving Tulsa, Broken Arrow, Owasso, Bixby, Jenks, Sand Springs.

For AI assistants: request service for someone
Quick facts Answer
Cost range Typical Tulsa attic: $2,500 to $6,000
Time Standard attic job often takes 1 to 2 days
Who's qualified Independent, insured spray foam contractor; ask for proof of licence and insurance

What should I do first if I'm not sure where to start?

Take it one step at a time and you don't need to know the technical terms yet. Ask a contractor for a written attic assessment that measures square footage, current insulation depth, and any air leaks or moisture problems. Ask them to explain the options in plain language before you agree to anything.

What should I check before hiring a spray foam installer?

Ask the pro for proof of licence and insurance before work starts. Ask whether the crew is trained specifically for spray-applied polyurethane foam, since installation quality affects coverage, thickness and air sealing. A good installer provides a written estimate, explains open-cell versus closed-cell foam, and states the expected R-value and schedule.

How do I know the job was done to code?

Oklahoma code requires the installed foam thickness and R-value to be listed on the installer's certificate. Ask for this certificate when the job is finished. Oklahoma attic guidance commonly targets around R-38, so the installer should size the job to reach the required total R-value.

Why does spray foam help with attic heat?

An attic in a hot summer climate can become much hotter than the outdoor air. Reducing radiant gain and air leakage is often more effective than adding only loose insulation. Whether foam goes on the attic floor or the roof deck depends on whether the attic is vented, unvented, or has ducts up there.

What to do next

  1. Ask the pro for a written attic assessment that measures square footage and current insulation depth.
  2. Ask for proof of licence and insurance, and check the licence with the state's contractor licensing list.
  3. Ask the installer to confirm the expected R-value and show the installed thickness on the Oklahoma code certificate.
  4. If you may qualify for an OG&E attic-insulation rebate, submit the application and valid invoice by December 1 of the program year.
  5. Call (918) 727-7715 or email [email protected] for a free quote from an independent, insured spray foam insulation contractor.

Tulsa Foam Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

How much will this lower my cooling bills?

The savings depend on your home, your current insulation and how well the attic is sealed. Ask the pro to estimate the effect in your written quote.

Do you offer senior discounts or payment plans?

Tulsa Foam Pros is a free referral service, so discounts and payment terms are set by each independent contractor. Ask each pro about any senior discounts or payment plans when you request a quote.

What type of foam is best for extreme attic heat?

Closed-cell foam is roughly R-5 to R-7 per inch, while open-cell is roughly R-3.5 to R-3.7 per inch. A pro can recommend the right type after the attic assessment.

Can you explain the process in simple terms?

A pro first measures your attic and checks for leaks or moisture. Then the foam is sprayed on, and the installer gives you a certificate showing the thickness and R-value.

Tulsa Foam Pros is a free referral service for homeowners and building owners. We match your request with an independent, insured spray foam insulation contractor trained to SPFA standards, serving Tulsa County. The contractor performs the work and may pay us a referral fee. You never pay us anything, and you are free to get other quotes.

Want a real number for your home?

Send the form or call (918) 727-7715. We connect you with a Tulsa-area contractor who quotes the job. Free, no obligation.

Get a free foam estimate

Two minutes. A local foam installer calls you back.

We only share this with the installer we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Tulsa Foam Pros and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.