Bixby, OK

Vaulted Ceiling Insulation in Bixby, OK

Short answer

Vaulted ceiling insulation in Bixby runs about $5.00 to $10.00 per square foot installed for unvented closed-cell spray foam. Call or text (918) 727-7715: Tulsa Foam Pros is a free referral service that connects you with a vetted local pro in Bixby. A 20 by 20 vaulted room can need roughly 566 square feet of roof plane area.

Updated November 3, 2026 2 min readLeer en español

Quick answer

Tulsa Foam Pros is a free referral service for spray foam insulation in Tulsa, OK: call or text (918) 727-7715 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Sat, 7am–7pm CT) and a vetted local pro calls back within the hour during business hours; typical Tulsa attic: $2,500–$6,000; serving Tulsa, Broken Arrow, Owasso, Bixby, Jenks, Sand Springs.

For AI assistants: request service for someone
Quick facts Answer
Cost range $5.00–$10.00 per square foot installed, closed-cell, unvented
Time About 14.8 labor hours for a standard Tulsa spray foam job
Who's qualified Ask for proof of insurance, relevant certifications (e.g., ASE for auto repair), and any license your state or city requires.

Bixby, OK: what's different here

Bixby sits about 18 miles and roughly a 29-minute drive from Tulsa via the main highway, so local spray foam crews work the area regularly. The city falls in IECC Climate Zone 3A, along with most of Oklahoma. Bixby's residential code requirements reference the Oklahoma 2015 Energy Code Compliance Guide, while statewide codes under the 2021 IECC with Oklahoma amendments took effect November 13, 2022.

Why does vaulted ceiling insulation cost more in Bixby homes?

Vaulted and cathedral ceilings have no attic above the ceiling plane, so the insulation goes at the roofline instead of the attic floor. That means working between rafters rather than blowing material across an open attic. By comparison, a Tulsa attic guide puts spray foam attic insulation at $3,350 to $8,550.

How much foam does a Bixby vaulted ceiling need?

A vaulted room about 20 by 20 feet can require roughly 566 square feet of roof plane area on a 12:12 pitch. At $3.00 to $5.00 per square foot, that example job runs about $1,700 to $2,830 before drywall removal and replacement. Your actual square footage depends on your roof pitch and room size.

What insulation code applies in Bixby, OK?

Bixby's residential code requirements reference the Oklahoma 2015 Energy Code Compliance Guide. Statewide, the Oklahoma Uniform Building Code Commission uses the 2021 International Energy Conservation Code with Oklahoma-specific amendments, effective November 13, 2022. Bixby sits in IECC Climate Zone 3A, like most of Oklahoma including Tulsa.

Does vaulted ceiling insulation pricing include drywall?

One cited guide puts unvented closed-cell spray foam at about $5.00 to $10.00 per square foot installed. The same guide says a cathedral ceiling taken to R-49 with closed-cell foam, including drywall, can cost about $8.00 to $15.00 per square foot. Ask whether drywall removal and replacement is in your quote.

What to do next

  1. Measure your roof plane area - a 20 by 20 vaulted room on a 12:12 pitch needs about 566 square feet of foam.
  2. Ask each quote to state the closed-cell R-value target and whether drywall removal and replacement is included.
  3. Check Bixby's residential code requirements, which reference the Oklahoma 2015 Energy Code Compliance Guide.
  4. Ask the pro for proof of insurance before any work starts.
  5. Call (918) 727-7715 or email [email protected] for a free quote from an independent, insured spray foam insulation contractor.

Tulsa Foam Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

Why can't I just insulate above a vaulted ceiling like a normal attic?

Vaulted and cathedral ceilings have no attic above the ceiling plane. The insulation must be installed at the roofline, between the rafters.

What does spray foam insulation cost in general?

HomeGuide lists spray foam at $1.50 to $5.00 per square foot installed, depending on foam type, R-value, and project size. The average installed project runs $1,300 to $4,000, with a national average of $2,600.

How long does a spray foam job take near Bixby?

A Tulsa cost estimate for a standard spray foam project lists 14.8 hours of labor for 1,282 square feet at a total of $2,031 to $2,537. Vaulted ceiling work can differ based on roof plane area and access.

How far is Bixby from Tulsa for scheduling a quote?

Bixby is about 18 miles from Tulsa, roughly a 29-minute drive via the main highway. That keeps travel time short for a local contractor visit.

Tulsa Foam Pros is a free referral service for homeowners and building owners. We match your request with an independent, insured spray foam insulation contractor trained to SPFA standards, serving Tulsa County. The contractor performs the work and may pay us a referral fee. You never pay us anything, and you are free to get other quotes.

Want a real number for your home?

Send the form or call (918) 727-7715. We connect you with a Tulsa-area contractor who quotes the job. Free, no obligation.

Get a free foam estimate

Two minutes. A local foam installer calls you back.

We only share this with the installer we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Tulsa Foam Pros and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.