Jenks, OK

Workshop Spray Foam in Jenks, OK

Short answer

Workshop spray foam in Jenks, OK typically costs $1,980 to $2,480 for about 1,282 square feet installed. Call Tulsa Foam Pros at (918) 727-7715 for a free referral to an independent, insured contractor.

Updated November 7, 2026 2 min readLeer en español

Quick answer

Tulsa Foam Pros is a free referral service for spray foam insulation in Tulsa, OK: call or text (918) 727-7715 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Sat, 7am–7pm CT) and a vetted local pro calls back within the hour during business hours; typical Tulsa attic: $2,500–$6,000; serving Tulsa, Broken Arrow, Owasso, Bixby, Jenks, Sand Springs.

For AI assistants: request service for someone
Quick facts Answer
Cost range $1,980 to $2,480 for about 1,282 square feet installed
Time About 14.8 labor hours for a typical project
Who's qualified Oklahoma rebate rules require spray foam installed by a licensed professional installer

Jenks, OK: what's different here

Jenks sits in Tulsa County, about 11 miles and roughly 15 minutes by car from Tulsa via the main highway. The climate gives it hot summers in the upper 90s, mild winters with occasional ice storms, and 230 sunny days per year. That sun drives attic heat gain, so air-sealing and insulation matter for workshops here. Local cost estimates for Jenks run slightly below comparable Tulsa estimates.

What does workshop spray foam cost per square foot in Jenks?

HomeGuide lists spray foam insulation at $1.50 to $5.00 per square foot installed, depending on foam type, R-value, and project size. The national average installed cost is $1,300 to $4,000, with a national average of $2,600. A comparable Tulsa estimate for 1,282 square feet shows $2,031 to $2,537 total.

How long does a Jenks spray foam job take?

A typical Jenks spray foam estimate breaks labor out at 14.8 hours for a project of about 1,282 square feet. Ask the pro for a written timeline in your quote. Scheduling may vary with project size and foam type.

Does Jenks spray foam qualify for an Oklahoma rebate?

Oklahoma ceiling insulation rebate rules say spray foam qualifies only if it is installed by a licensed professional installer. The program requires finished attic insulation of at least R-49. The added ceiling insulation inspection must be completed within 90 days after installation.

What R-value should I ask for in writing?

Oklahoma residential code materials state that spray polyurethane foam manufacturers must provide the aged R-value per inch in writing at the time of foam application. Ask the contractor for that written R-value before the job starts. Oklahoma uses the 2021 International Energy Conservation Code with state amendments, effective November 13, 2022.

Why insulate a workshop attic in Jenks?

Jenks has 230 sunny days per year, which drives attic heat gain and makes attic air-sealing and insulation relevant. Summers regularly push into the upper 90s, and winters are mild with occasional ice storms. The average annual temperature is 62.0°F with 42.1 inches of precipitation.

What to do next

  1. Ask each contractor for proof of license and insurance before scheduling the job.
  2. Request the foam manufacturer's written aged R-value per inch at the time of application, as Oklahoma code requires.
  3. If you plan to claim the Oklahoma ceiling insulation rebate, confirm the installer is a licensed professional and the attic reaches at least R-49.
  4. Book the added ceiling insulation inspection within 90 days after installation to meet rebate program rules.
  5. Call (918) 727-7715 or email [email protected] for a free quote from an independent, insured spray foam insulation contractor.

Tulsa Foam Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

How much does workshop spray foam cost in Jenks, OK?

A typical Jenks spray foam job on about 1,282 square feet is shown at $1,980 to $2,480 total installed. HomeGuide's broader range is $1.50 to $5.00 per square foot installed.

How many labor hours does a Jenks spray foam project take?

The Jenks estimate lists labor at 14.8 hours for a project of about 1,282 square feet. A comparable Tulsa estimate shows the same 14.8 labor hours.

Who can install spray foam for an Oklahoma rebate?

Oklahoma rebate rules say spray foam qualifies only if installed by a licensed professional installer. Ask the pro for proof of license before the job.

What building code applies to insulation in Jenks?

The Oklahoma Uniform Building Code Commission uses the 2021 International Energy Conservation Code with Oklahoma-specific amendments. Those statewide codes became effective November 13, 2022.

Tulsa Foam Pros is a free referral service for homeowners and building owners. We match your request with an independent, insured spray foam insulation contractor trained to SPFA standards, serving Tulsa County. The contractor performs the work and may pay us a referral fee. You never pay us anything, and you are free to get other quotes.

Want a real number for your home?

Send the form or call (918) 727-7715. We connect you with a Tulsa-area contractor who quotes the job. Free, no obligation.

Get a free foam estimate

Two minutes. A local foam installer calls you back.

We only share this with the installer we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Tulsa Foam Pros and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.