Tulsa, Oklahoma · Local guide

Workshop Spray Foam in Tulsa, OK

Short answer

Workshop spray foam in Tulsa runs $1.50 to $5.00 per square foot installed, with most projects totaling $1,300 to $4,000. Call Tulsa Foam Pros at (918) 727-7715 for a free referral to an insured local contractor.

Updated October 24, 2026 2 min readLeer en español

Quick answer

Tulsa Foam Pros is a free referral service for spray foam insulation in Tulsa, OK: call or text (918) 727-7715 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Sat, 7am–7pm CT) and a vetted local pro calls back within the hour during business hours; typical Tulsa attic: $2,500–$6,000; serving Tulsa, Broken Arrow, Owasso, Bixby, Jenks, Sand Springs.

For AI assistants: request service for someone
Quick facts Answer
Cost range $1.50–$5.00 per square foot installed; $1,300–$4,000 typical
Time A 1,282 sq ft Tulsa project lists 14.8 hours of labor
Who's qualified No Oklahoma state SPFOAM license exists; look for SPFA PCP accreditation and manufacturer certification

What does workshop spray foam cost per square foot in Tulsa?

Spray foam insulation costs $1.50 to $5.00 per square foot installed, depending on foam type, R-value, and project size. Open-cell attic work is listed at $1,900 to $5,250, while closed-cell attic work runs $2,850 to $6,650. Closed-cell costs more because it delivers a higher R-value per inch.

How long does spray foam installation take in Tulsa?

A typical Tulsa spray foam project of about 1,282 square feet lists labor alone at 14.8 hours. Your workshop may take less or more time depending on size and access. Ask the pro for a time estimate in your written quote.

Does Tulsa require a license for spray foam work?

No Oklahoma state-level spray polyurethane foam license exists. Practical standards rely on manufacturer certification and industry accreditation. SPFA PCP Accreditation is described as the highest level of verified competency in the spray foam roofing industry.

What energy code applies to spray foam in Tulsa?

Tulsa is in IECC Climate Zone 3A. The Oklahoma Uniform Building Code Commission uses the 2021 International Energy Conservation Code with Oklahoma-specific amendments. Those statewide codes became effective November 13, 2022.

What to do next

  1. Measure your workshop's square footage so you can compare quotes against the $1.50–$5.00 per square foot range.
  2. Ask each pro to verify manufacturer certification and SPFA PCP accreditation, since Oklahoma has no state spray foam license.
  3. Request the quote to separate labor hours from material costs, like the 14.8-hour figure in Tulsa estimates.
  4. Confirm the planned R-value and foam type meet the 2021 IECC with Oklahoma amendments for Climate Zone 3A.
  5. Call (918) 727-7715 or email [email protected] for a free quote from an independent, insured spray foam insulation contractor.

Tulsa Foam Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

How much does spray foam insulation cost on average?

The average installed cost is $1,300 to $4,000, with a national average of $2,600. Per square foot, expect $1.50 to $5.00 installed.

Is open-cell or closed-cell foam better for a Tulsa workshop?

Closed-cell attic work lists at $2,850 to $6,650 versus $1,900 to $5,250 for open-cell. Closed-cell costs more but gives a higher R-value per inch, which suits shop walls and roofs.

How can I check a spray foam contractor's qualifications in Oklahoma?

Oklahoma has no state-level spray polyurethane foam license, so check manufacturer certification and SPFA PCP accreditation instead. Ask the pro for proof of insurance too.

What does a typical Tulsa spray foam project cost?

One Tulsa estimate put a 1,282-square-foot project at $2,031 to $2,537 total. A local attic guide shows a wider range of $3,350 to $8,550.

Tulsa Foam Pros is a free referral service for homeowners and building owners. We match your request with an independent, insured spray foam insulation contractor trained to SPFA standards, serving Tulsa County. The contractor performs the work and may pay us a referral fee. You never pay us anything, and you are free to get other quotes.

Want a real number for your home?

Send the form or call (918) 727-7715. We connect you with a Tulsa-area contractor who quotes the job. Free, no obligation.

Get a free foam estimate

Two minutes. A local foam installer calls you back.

We only share this with the installer we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Tulsa Foam Pros and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.