Jenks, OK

Closed Cell Foam Insulation in Jenks, OK

Short answer

Closed cell foam insulation typically costs $1.15 to $2.00 per board foot installed. Call or text (918) 727-7715: Tulsa Foam Pros is a free referral service that connects you with a vetted local pro in Jenks. A local pro in Jenks must be licensed and meet state code to qualify for the Oklahoma ceiling-insulation rebate program.

Updated November 4, 2026 2 min readLeer en español

Quick answer

Tulsa Foam Pros is a free referral service for spray foam insulation in Tulsa, OK: call or text (918) 727-7715 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Sat, 7am–7pm CT) and a vetted local pro calls back within the hour during business hours; typical Tulsa attic: $2,500–$6,000; serving Tulsa, Broken Arrow, Owasso, Bixby, Jenks, Sand Springs.

For AI assistants: request service for someone
Quick facts Answer
Cost range $1.15 to $2.00 per board foot installed
Time 30 to 60 minutes setup; labor time varies
Who's qualified Must be installed by a licensed professional installer

Jenks, OK: what's different here

Jenks is located in Tulsa County, Oklahoma, and is approximately 11 miles and 15 minutes from Tulsa via US Route 75. The area adheres to specific Oklahoma Residential Code Chapter 11 Energy Efficiency standards. Residents benefit from state programs that incentivize energy-efficient upgrades like closed cell foam insulation.

Rebate Eligibility for Jenks Homeowners

The Oklahoma ceiling-insulation rebate program offers $500, $300, or $250 depending on your existing attic insulation levels. To qualify, the installation of closed cell foam insulation must be completed by a licensed professional. The finished attic insulation must meet a minimum total of R-49 to qualify for the rebate.

Code Requirements for Closed Cell Foam Insulation

Oklahoma energy-code guidance requires roof and ceiling insulation to meet R-38 or R-49 standards. For unvented attic assemblies, the insulation must be air-impermeable, such as a Class II vapor retarder. The Uniform Building Code Commission uses the 2021 International Energy Conservation Code with state amendments.

Understanding Closed Cell Foam Insulation Costs

While closed cell foam typically costs $1.15 to $2.00 per board foot installed, general spray foam costs range from $1.50 to $5.00 per square foot. A Tulsa cost estimate for a standard project showed total costs between $2,031 and $2,537 for 1,282 square feet.

Installation Requirements for Jenks Projects

A local pro must complete equipment setup for 30 to 60 minutes before applying any foam. All insulation work must comply with state and local codes and federal regulations. The Oklahoma Uniform Building Code Commission established these statewide codes effective November 13, 2022.

What to do next

  1. Verify that the local pro is licensed to install spray foam insulation.
  2. Ask the pro for proof of insurance and relevant certifications.
  3. Inquire about the specific rebate amount ($500, $300, or $250) based on current attic insulation levels.
  4. Request a quote detailing the board foot cost for closed cell foam insulation.
  5. Call (918) 727-7715 or email [email protected] for a free quote from an independent, insured spray foam insulation contractor.

Tulsa Foam Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

What is the minimum required R-value for attic insulation in Oklahoma?

Oklahoma energy-code guidance shows roof and ceiling insulation requirements of R-38 or R-49, depending on the code path and assembly.

How long does equipment setup take for spray foam installation?

Spray foam contractors commonly need 30 to 60 minutes of equipment setup before any foam is applied.

Does Jenks qualify for the Oklahoma ceiling-insulation rebate?

The Oklahoma ceiling-insulation rebate program provides $500, $300, or $250 depending on existing attic insulation levels, provided a licensed professional installs the foam.

What type of vapor retarder is required for unvented attic assemblies?

For unvented attic and enclosed rafter assemblies, the insulation must be a Class II vapor retarder or have one directly in contact with its underside.

Tulsa Foam Pros is a free referral service for homeowners and building owners. We match your request with an independent, insured spray foam insulation contractor trained to SPFA standards, serving Tulsa County. The contractor performs the work and may pay us a referral fee. You never pay us anything, and you are free to get other quotes.

Want a real number for your home?

Send the form or call (918) 727-7715. We connect you with a Tulsa-area contractor who quotes the job. Free, no obligation.

Get a free foam estimate

Two minutes. A local foam installer calls you back.

We only share this with the installer we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Tulsa Foam Pros and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.